2

Dueck Defense’s New Rapid Transition Sights. No need for flip up BUIS anymore?

Okay gang, after seeing these on Brownell’s a while back, I had to post on them. How fitting it was for me to find these after yesterday’s post. I have not tested these yet, but man they look pretty neat. Just from looking at them and reading about them, I will give you my common sense Pros and Cons. As far as the stats go They sit at the same bore height and sight picture as your MILSPEC A2 sights. The mounting arm only sits .20″ above rail height. This keeps them from getting in the way of other optic’s line of sight. They make them for left and right handed shooters. The rear aperture has the same windage and elevation adjustments in 1/2 moa clicks. The mounting offset is 45 degrees from top of weapon.
So here is why this is relevant with yesterday’s post of “Co-Witness or not to Co-Witness”, can we throw flip up BUIS and co-witnessing out the window now? Not so fast, Let me tell you the problems I see as an average shooter. The AR-15/M-4 platform is starting to turn into a set of legos. The more crap you mount on your weapon, the less effective it starts to become. Of course you have to have Iron Sights 100% must! I see these new sights being effective 50 meters or closer. I believe these will still be “iffy” on taking shots with iron sights out past 100 meters, unless laying down. If you plan on using these as your BUIS for every situation, I would practice everyday before I had to operate them. With the cycling of your M4 you have a recoil you are used to, with the gun canted 45 degrees it changes your cheek weld, your shoulder placement, and the way you adjust for the weapon’s recoil. Standing up or prone, I see this being a bigger adjustment that one is led to believe. I also see this creating other snag points to be thought about with your sling and gear.
Okay, enough with the Cons. Here are some of the neat things this sight platform creates. Co-witnessing, you don’t have to worry about this anymore. Primary optic breaks or is no longer useful due to closer range, no problem. You don’t have to flip up any sights, all you do is cant the weapon 45 degrees and proceed. This can add 3 or 4 extra shots down range at the bad guys, major plus! Also, if you have ever co-witnessed sights through an optic, you know at first it’s a tad hazy acquiring your sight picture again. Also, when co-witnessing you have a smaller field of view. When you are in a combat situation and need to acquire your next target quickly, the last thing you want to do is take your eye of your front sight.
Overall I think this could be a great new product for AR-15′s and M4′s. Fitted with the correct task and an operator willing to practice, it should get the job done. If you have any thoughts, ideas, or have actually operated using this style sight, feel free to post your review. Have a great day, Jim

As soon as Brownell’s has the product link up I will get it added. For now click this link and search Dueck Defense in their site search. Click here for AR-15/M16 parts & accessories from Brownells.com

2

Co-Witness or not to Co-Witness that is the question and other SNAFU’s to keep in mind.

I might catch flack for this one, but here she goes. I personally think it is more important to be able to Co-Witness BUIS that it is to have a reliable zero retention quick release optics mount. Your Back Up Iron Sights, or BUIS, are the most important sighting platform on ANY weapon. You don’t have objective lenses to screw up, glass to keep clean, batteries to change, and God knows your not going to knock a good set out of place. Being able to Co-Witness a holographic sight is extremely important. This means, if your batteries go out or the SOB just doesn’t want to work, you can always have a sight picture through the holographic sight. If it gets dirty, you just have one lens to clean off, no problem. Here is why I don’t relying on a high quality quick release optics mount. First off, the retention of zero is only going to last so long. The detent levers are eventually going to wear. If this happens when in combat you are screwed. Secondly, if your optics fail and you have to take them off, do you stow them or toss them on the ground? Well you know if involved in covert operations, you dont need to be leaving any evidence of who did the snagging and bagging. Now in the defense of a quick release, if you have a lens shatter on an actual scope that is being co-witnessed, this is a good time to have the option. All in all, I personally would rather be able to co-witness. I would love to hear any opinions on this discussion whether you are for or against co-witnessing and why.

Here are some examples of co-witnessing: Notice how you still maintain a sight picture of BUIS through optics

 

 

 

 

 

Here are a few great optics mounting accessories that allow for co-witnessing your iron sights:

A.R.M.S., Inc. .5″ Spacer for ARMS 22M68 Mount

Arms Aimpoint Comp Right Throw Lever Mount

Aimpoint CompM3 – 4MOA w/ A.R.M.S. 22M68 Mount & Co-Witness Cantilever Spacer – MSP PACKAGE DEAL

Vortex Optics Tactical 30mm Riflescope Ring, Extra-High, Absolute Co-Witness for AR15

Vortex Optics 1 x 30mm StrikeFire Red Dot Flat Top AR Rifle Scope, Matte Black Finish with 4 MOA Illuminated Red Dot Reticle

1

Must have Folding Sights for AR 15 and M-4. Troy Industries win and here is why!

AR 15 Troy Industries Folding Battle SightAR 15 Troy Industries Folding Battle SightAR 15 Troy Industries Folding Battle SightIf you are in the market for reliable and easy to install accessories for you AR 15, I’ve got a winner for you. I have ran a handful of Back Up Iron Sights (BUIS) on my AR 15′s. PRI, A.R.M.S., and Troy have always been industry leaders in my opinion. It’s not because they are the cheapest or the most heavily marketed, they are made to be 100% reliable, durable, and retain zero. Troy Industries Folding Battle sights are made to flip up with no assistance and to flip down by depressing a small button on the side of the sight. They are held in place by two 1000 pound force detent balls. These sights are not folding down unless you tell them to. These sights are proven over and over again to retain actual zero and also made to co-witness through electronic optics. This means, if your batteries fail or your EOTech just stops working, you can still have an accurate sight picture. They have several options available as well. You can get an HK style front sight, you can also order sights that are imbedded with tritium as well.
Troy Industries Front and Rear Micro BattleSight Combo – Black
Troy Industries Micro HK Style Front and Rear Folding Battle Sight

Let’s review why these are a must have:

- co-witness
- 100 percent retention of zero
- hard coat anodized and impregnated with teflon
- will not flip down
- operator proven